Harry Logo
Fresenius Logo
Haribo Logo
Meggle Logo
Novartis Logo
Ricola Logo
Schaer Logo

FLOW WRAPPING MACHINES

Alpha Wrapper 8
three or four side seal

Horizontal form fill and seal bags or flowpacks are among the most common types of packaging. The individual and modular design of the format flexible FUJI form fill and seal machines offers solutions for almost every application.

The form fill and seal machine consists of 3 modules:

  1. Infeed (infeed chain or belt)
  2. Center seal unit (top, bottom, side or 4 sides)
  3. End seal unit (box motion or rotating)

The model differentiation is based on the center sealing. The following machines are three or four side seal machines. 

Contact Us

FW3430B – 3-side seal

For flat products. Advantages are that the front and back of the pack can be printed over the entire surface without a disruptive sealing seam in the middle of the package. Alternatively, a handcrafted look without printing can be achieved= (Klapppack)

Standard specifications

product height up to 30 mm
Speed up to 150 packs/min.
film width up to 650 mm

Packaging machines 3 and 4 Rim seal 3 Rim seal Pack
Packaging machines 3 and 4 Rim seal 4 Rim seal Pack
Packaging machines 3 and 4 edge 4 edge seal film run.

FW3431FSB

For flat products. Advantages are that the front and back of the pack can be printed over the entire surface without a disruptive sealing seam in the middle of the package. Other areas of application are pharmaceutical products and medical technology.

Standard specifications

Product height up to 30 mm
Speed up to 150 packs/min.
Film width up to 650 mm

Contact

Contact us

Lars Kistenmacher, CEO

+49 40 48 06 110
verkauf@fuji-packaging.de

Contact us